Japanese to Chinese
| 间隙 🇨🇳 | 🇬🇧 Gap | ⏯ |
| 测间隙 🇨🇳 | 🇬🇧 Gap measurement | ⏯ |
| 生产间隙 🇨🇳 | 🇬🇧 Production gap | ⏯ |
| 留0.05mm间隙 🇨🇳 | 🇬🇧 0.05mm clearance | ⏯ |
| 确认纵切间隙 🇨🇳 | 🇬🇧 Confirm the vertical cut gap | ⏯ |
| 缝隙 🇨🇳 | 🇬🇧 Gap | ⏯ |
| 与墙体之间有缝隙 🇨🇳 | 🇬🇧 There is a gap between the wall and the wall | ⏯ |
| 把螺丝锁紧测间隙 🇨🇳 | 🇬🇧 Lock the screw sittin | ⏯ |
| 缝缝隙 🇨🇳 | 🇬🇧 Seam gap | ⏯ |
| 间隙在0.01以内是好的 🇨🇳 | 🇬🇧 Gap within 0.01 is good | ⏯ |
| 这个间隙还要配磨的 🇨🇳 | 🇬🇧 This gap has to be milled | ⏯ |
| 装三把刀在上面测间隙 🇨🇳 | 🇬🇧 Put three knives on top of the gap | ⏯ |
| 每两个工件之间留有适当的间隙 🇨🇳 | 🇬🇧 Leave a proper gap between each of the two workpieces | ⏯ |
| 先修磨一次再测一下间隙 🇨🇳 | 🇬🇧 Grind it once before you measure the gap | ⏯ |
| 留一点缝隙 🇨🇳 | 🇬🇧 Leave a little gap | ⏯ |
| 你可清洗白驹过隙何欣jtdufuyhfdiogcmfdfiug 🇨🇳 | 🇬🇧 You can clean the white swashes through the gap hehin jtdufuyhfdio gcmfffiug | ⏯ |
| 垫片宽了，这样上刀与下刀会卡住，我们测不出间隙 🇨🇳 | 🇬🇧 The gasket is wide, so that the upper and lower knife will get stuck, we can not measure the gap | ⏯ |
| 垫片进入刀片要三分之二，这样我们才能准备的测出间隙 🇨🇳 | 🇬🇧 The gasket gets into the blade two-thirds so we can prepare the measurement gap | ⏯ |
| 问题是气阀也有一点同样的间隙但不能调整翻工只能报废 🇨🇳 | 🇬🇧 The problem is that the valve also has the same gap but can not adjust the flip only scrap | ⏯ |
| 换间房间 🇨🇳 | 🇬🇧 Changing rooms | ⏯ |